ppipella

Take-Up Frames

Click here to view full catalog.

Light Duty (PLD)

  • Low cost - ball bearing frame
  • 2-pieces saddle design works for any 2-bolt housing
  • Bearing sizes 1/2” through 3-1/2”
   

Medium Duty (PMD)

  • Medium duty - roller bearing frame
  • 1-piece saddle design for increase strength
  • Bearing sizes 1/2” through 3-1/2”
   

Heavy Duty (PHD)

  • Heavy duty - roller bearing frame
  • Bearing mounting hole pattern drilled to match bearing
  • Bearing sizes 1-1/2” through 6”
   

Heavy Duty (PHD)

  • Xtra heavy duty - roller bearing frame
  • Bearing mounting hole pattern drilled to match bearing
  • Bearing sizes 6” through 12”
   

Top Angle (PTA)

  • Used for bearings with a round bottom housing; Dodge & Linkbelt E
  • Mounting holes are the same as SKF, Linkbelt, etc., but different bearing
  • Frame disassemble in the field and re-assemble around the bearing
   

Protected Angle (PPA)

  • Similar to PTA, except channel bottom for SKF, Linkbelt bearings
  • Same mounting hole pattern for the frame as our PTA
  • Disassemble in the field and re-assemble around the bearing
   

Slide Tube (PST)

  • Standard templates for 2-bolt housings (size 500 drilled to order)
  • Standard grease zerk to lubricate and protect the screw
  • Protected screw design used for ball and unit roller bearings
   

Wide Slot Side Mount (PWS)

  • Compact design for tight installations
  • Side mount; normally used for ball bearings
  • In-line frame; rod pulls at center line of bearing 
   

Wide Slot Center (PCP)

  • Symmetrical foot mounted frame; install from either direction
  • In-line frame; rod pulls at center line of wide slot bearing
  • Can be retrofitted with 2HD Rod End Rectangular Flange Mount cylinder - NFPA #MF1
  • PCP Hydraulic Conversion Guide is available for download from our website
   

Heavy Duty Hydraulic (PHYD)

  • Same as PHD but with hydraulic assist
  • Designed for push and pull applications
  • Frame mounting holes and basic dimensions same as PHD
  • Uses standard 2HD series rod end trunnion mount cylinder
  • Accommodates pillow block bearings from 1-1/2” to 12”
   

Hydraulic Cylinder (HYD)

  • Rod end trunnion mount; NFPA style MT1
  • Standard Series 2HD cylinder with clevis and pin for PHYD
  • Standard cylinders have lip seals, breathers, and SAE ports
   

HYDHPUMP

  • Double action set - 2 Stage Hand Pump
  • Includes fittings, pump, valves, tank, and quick connects

LHOSE

Hose kit for 6" & 7" cylinders - includes quick connects

MHOSE

Hose kit for 5” & smaller cylinders - includes quick
connects

XHOSE

Hose kit for 8” cylinders - includes quick connects

   

PHYD Kits

  • PPI will match frames and cylinders for each application
  • Cylinders are shipped separately for their protection
  • Cylinders are mounted with a simple keeper plate & pin
   

PHYD Kits with Pump

  • PPI will supply frame, cylinder, and hand pump
  • One hose kit for each pair of frames
  • Pumps are needed for 1 to 4 sets of frames
  • Pumps & Cylinders are shipped separately

 

 

 


« Back

© 2017 Precision, Inc. All Rights Reserved.